Pacific Victor Marine 34 Aluminum Sport Fisher
Twin Yanmar Diesels
- Boat REF# · 265773
- LOA · 10.36m
- Year · 1991
- Construction · Aluminium
- Underwater profile · semi-displacement
- Berths · 4
- Engine · 2 x Diesel 300hp, Yanmar 6LY (1997)
- Lying · Seattle, WA USA - Shown by Appointment
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Pacific Victor Marine |
---|---|
Builder | Pacific Vector Marine |
Lying | Seattle, WA USA - Shown by Appointment |
Fuel capacity | 300.0 G Total - 2 Tanks |
Water capacity | 50.0 G Total - 1 Tanks |
Holding tank capacity | 25.0 G Total - 1 Tanks |
Mechanical
Engine | 2 x Diesel 300hp |
---|---|
Engine make and model | Yanmar 6LY (1997) |
Engine Hours |
engine1= 500 engine2= 500 |
Engine Cooled | Indirect |
Steering | Wheel |
Drive | V Drive |
Prop(s) | 3 blade |
Fuel consumption (approx) | 10.0 G /hour At Cruising Speed |
Cruising speed (approx) | 18 knots |
Max speed (approx) | 34 knots |
Engine spares |
---|
The twin Yanmar 6LY-300 HP engines have very low hours and have been maintained by Pat's Marine engines. An example, all batteries were replaced in September of this year. Engines have been run regularly with oil and filter changes .
The new engines were installed in 1997 by Pats Marine Engines.
Accessibility to both engines is very good since both engine enclosures are removable.
The drive system is through V drives.
The Inverter/Charger is a Xantrex.
Dimensions
LOA | 10.36m |
---|---|
Beam | 3.66m |
Draft Min | 0.76m |
Airdraft | 3.66m |
Displacement | 20,003.4lbs |
Headroom | 1.95m |
Storage | On marina |
Electrical Systems
12 volt battery, 6 batteries charged by: engine, shore power
Construction
Construction | Aluminium |
---|---|
Underwater profile | semi-displacement |
Finish | Paint finish |
This Custom 34' Fishing Vessel was made in Marysville, WA by Pacific Victor Marine, a small custom aluminum boat builder primarily know for construction of commercial fishing boats and construction of hulls for the Coast Guard. This is one of a limited number of recreational boats built.
The design and interior layout of this vessel supplies a comfortable pleasure vessel and a fast fishing boat.
This is some of the finest aluminum construction of any boat on the market. The decks have excellent non-skid with easy access to the foredeck on wide side decks. Both engines are accessed from the cockpit through deck hatches and the engine enclosures are completely removable.
Special note should be made of the curved transom construction and well-finished hull and deck -- these are features that demonstrate a higher level of accomplishment than is often seen on recreational aluminum boats. The flybridge is easily accessed by a wide set of steps and there are three helm seats on the bridge plus a bench seat.
Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.
Accommodation
Total # of berths | 4 |
---|---|
No. of double berths | 2 |
Cabin(s) | 2 |
Handbasin | 1 |
Shower | 1 |
Heads | 1 heads (Vac flush) |
Boarding the vessel is through a transom door or from the side decks. There is even a built in step on both sides of the engine hatch.
Access the the interior is through a hinged aluminum door from the cockpit. Inside to port is a traditional dinette that converts to a berth. To starboard is the galley which includes an under-counter refrigerator, a top loading freezer and a Force 10 three-burner stove w/oven. Also on the starboard side is the lower helm station with built-in seat. A companion seat is located to port, also with a built-in seat.
Access to the forward stateroom is down a curved staircase also with a curved aluminum hand rail. The queen berth is on centerline with storage on both sides. The head is to starboard just as you enter the compartment.
Overall , this vessel supplies a comfortable interior and excellent hull for fishing or crabbing.
Cabin Heat is supplied by a Webasto diesel forced air unit.
3 burner gas cooker/stove
Accommodation
Cooker/stove | |
---|---|
Oven | |
Sink | |
Refrigerator | |
Freezer | |
Carpet | |
Curtains | |
Cabin heating | |
Pressurised water system | |
Hot water system |
Boarding the vessel is through a transom door or from the side decks. There is even a built in step on both sides of the engine hatch.
Access the the interior is through a hinged aluminum door from the cockpit. Inside to port is a traditional dinette that converts to a berth. To starboard is the galley which includes an under-counter refrigerator, a top loading freezer and a Force 10 three-burner stove w/oven. Also on the starboard side is the lower helm station with built-in seat. A companion seat is located to port, also with a built-in seat.
Access to the forward stateroom is down a curved staircase also with a curved aluminum hand rail. The queen berth is on centerline with storage on both sides. The head is to starboard just as you enter the compartment.
Overall , this vessel supplies a comfortable interior and excellent hull for fishing or crabbing.
Cabin Heat is supplied by a Webasto diesel forced air unit.
3 burner gas cooker/stove
Deck Gear
Warps | |
---|---|
Fenders | |
Swim Platform | |
Swim Ladder | |
Instrument Covers |
1 anchors
(Bruce)
30.48m of chain
45.72m of warp
There is also a custom dinghy deck the can be mounted over the cockpit.
Nav Equipment
Compass | |
---|---|
Speed | |
Log | |
Radar | |
VHF | |
GPS | |
Chart plotter | |
Stereo | |
Navigation lights | |
Echo sounder |
The following instruments are located on the flybridge:
- Raytheon R20XX Radar
- Sitex - LCS200 that includes depth-speed-log and temperature.
- Standard Horizon VHF
The following instruments are located at the lower station:
- Standard Horizon VHF
- Sitex LCS200 depth-speed-log and temperature
- Raytheon NAV398GPS
There is also a stereo with speakers in the saloon.
Safety Equipment
Life jackets | |
---|---|
Horn | |
Boarding ladder |
2 bilge pumps (0 manual / 2 Electric)
Broker's Comments
VIRTUAL TOUR - VIDEO - 80 TO 100 PHOTOS - FULL SPECS CAN BE VIEWED OF THIS VESSEL!
It's not often you find a custom recreational vessel, made of aluminum that shows this well . The welding is so good it's hard to believe it's not fiberglass.
With the ability to travel at 30 knots AND with a comfortable interior this is a great family boat that can do many things. While it was built for fishing in the Northwest it works well as a cruising boat too. The twin 300 HP Yanmar engines and great construction make it a multi use vessel.
Cut and paste this link to view the interesting story of this Custom Aluminum Fishing Boat in "A Boat Owner's Insights">
https://waterlineboats.com/a-boat-owners-insights-custom-aluminum-fishing-boat/
These boat details are subject to contract.
Note: Offers on the asking price may be considered.