12 volt, 4 batteries charged by: engine, shore power

GRP construction with Planing underwater profile, gelcoat finish

This is a relatively low volume production model from Bayliner and features 12" more beam than the standard 30' model and includes larger fuel tanks.

This is standard, modern Bayliner all-fiberglass construction with no exterior wood for low maintenance.

Twin V6 gasoline engines are fitted under very large gas-strut-supported hatches in the cockpit. The engines are coupled through the transom to stern drives.

The main salon features "U" shaped seating around a removable dining table to port and a galley to starboard. The galley features a Wallas stove/heater unit which uses kerosene fuel. A separate Red Dot heater using engine coolant provides cabin heat when underway. The dining area can be converted to a double berth. The helm station is forward to starboard. Down stairs forward is a companionway leading forward to the bow compartment which is filled with a triangular berth. A door to port leads to the midship cabin located under the salon floor. That cabin has a single, built in seat and a large double berth. The head is located through a door to starboard.

The flying bridge is reached by ladder from the cockpit. A folding bimini shade can be extended over the flying bridge and additional seating is provided on the starboard and aft sides.

3 berths with 3 doubles and 0 singles in 3 cabin(s) 2 burner diesel cooker

Navigation systems include an Eagle Seacharter 480df GPS plotter.

1 anchors
(Fortress Aluminum)
32'10" of chain
196'10" of warp

Downrigger bases fitted on both sides of the cockpit.

2 bilge pumps (0 manual / 2 electric)