The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Amel Maramu 46 Ketch

£0 Sold / Unavailable
  • Boat REF#  ·  322313
  • Length  ·  46'0"
  • Year  ·  1987
  • Construction  ·  GRP
  • Underwater profile  ·  Fin
  • Sleeping berths  ·  7
  • Engine  ·  1 x diesel 60hp, Cummins 4 cyl -4B3-9M- 60 HP (2012)
  • Lying  ·  Lake Union Seattle
Boatshed Seattle
Boatshed Seattle
Roger Drill

The boat featured is not currently for sale by Boatshed. The boat information and images presented are part of Boatshed’s back catalogue of the 25,000+ boats we have listed in the last 20 years and appear here for general information and guidance purposes about Boatshed and our boat selling systems and services

Extra Details

Designer Henri Amel and Jacques Carteau
Builder Chantiers Amel S.A.
Lying Lake Union Seattle
Fuel capacity 127.0 USG Total - 1 Tanks
Water capacity 275.0 USG Total - 1 Tanks
Holding tank capacity 33.0 USG Total - 2 Tanks
Last survey 22/05/2019

Mechanical

Engine 1 x diesel 60hp
Engine make and model Cummins 4 cyl -4B3-9M- 60 HP (2012)
Engine Hours engine1= 540
Engine Cooled Indirect
Steering wheel
Drive shaft
Prop(s) 3 blade
Fuel consumption (approx) 1.3 USG /hour At Cruising Speed
Cruising speed (approx) 7 knots
Max speed (approx) 8 knots
Generator output 5KVA
Generator Hours 450
Engine spares

The engine was replaced in 2012 with a 60 hp Cummins diesel engine.
The 5 KW Northern lights generator was removed and repainted in 2012. All needed maintenance was performed and the SS exhaust elbow was replaced.
The Hurth 250 transmission was rebuilt in 2012
A new 240 volt AC system was installed in 2010 including new breakers with GFI, 240/120 volt control panel, auto transformer and Dyna Gen
12 volt /3000 W 230 volt Victron Quattro inverter/battery charger
There is 240v/50 amp shore power and 120v/30 amp shore power with two seperate battery chargers.

Dimensions

Length 46'0"
LWL 35'9"
Beam 13'1"
Draft Min 6'6"
Displacement 28,444.9lbs
Headroom 6'2"
Storage On marina

Rig

Ketch rigged Amel Aluminium spars (1987) with Stainless Steel standing rigging (2010)

Sails

Reefing mainsail Doyle - Other ()
Headsail Mack SAILS - Furling (2017)
Other sails Doyle in mast furling - Mizzen (2017)
Amel light air ballooner / genoa ()
Amel mizzen sailwire luff stay sail ()
Amel hank-on storm jib/staysail ()
Spinnaker gear

Both the main and mizzen are in-mast furling. The main has electric furling and the mizzen is manual.
The main mast , mizzen and both booms were re-painted in 2018
Two whisker poles are included.
A removable inner forestay was added in 2017
A new Mack sails premium Dacron furling genoa w/ Sunbrella cover and foam luff was added in 2017. It has a Harken MKIV roller fueler (2017)
All SS rigging, and swage ends were replaced 2010.

Electrical Systems

12 volt battery, 240 volt generator, 240 shore power voltage, 7 batteries charged by: engine, wind generator, shore power, generator A new 240/120 volt AC panel 2012

Construction

Construction GRP
Underwater profile Fin
Finish Paint finish

All Amel hulls and decks are built to world class offshore standards. Even the forward section of the vessel has a watertight bulkhead with watertight door in the event of a collision.

In 2014 the keel was stripped to bare metal, cleaned, faired and covered with five coats of "Rust Lock" and 2 coats of Micron 66 bottom paint. The bottom was painted again in 2022 with two coats of Sea Hawk.
The under water hull section was stripped of gel coat and recovered with two part epoxy in 2008.

The hull sides were repainted with Awlgrip in 2010 and the cabin decks were repainted with two part epoxy.

Hull design is Fin Keel with skeg.

Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.

Accommodation

Total # of berths 7
No. of double berths 3
No. of single berths 1
Cabin(s) 2
Sink 3
Shower 2
Air conditioning 1 Air conditioning Units rated at 16000 BTU/h
Heads 2 heads (Manual)

The entrance to the interior is through the mid cockpit. The cockpit has a hard dodger with a waterproof cover with2 side windows.

Moving into the interior you find the galley to port and nav station to starboard. The galley has an Isotherm front-loading fridge and a top loading freezer. The freezer has a new compressor and evaporator in 2021. The fridge was converted from water cooled to air cooled because the air cooling uses less power. It can be reversed for tropical cruising. The stove is a Force 10 propane two burner with oven.
Forward of the galley is a large convertible dinette with a centerline mahogany table with fold up leaf.

Forward of the nav station is a bench seat. The entrance to the forward head and guest stateroom is just off center to starboard.
A propane catalytic cabin heater is located on the starboard forward saloon bulkhead. Cabin heat and cooling is also supplied by a single 16,000 BTU Air Marine A/C unit.
The boat is wired and ducted for diesel heat but there is no heat unit.
There is a water tight bulkhead at the entrance to the guest stateroom if there is damage to the forward section of the vessel and it is flooded this will keep the vessel afloat.

Back in the saloon, aft of the nav station is the companionway to the master stateroom and head. The stateroom has an off-center double berth with a vanity table with stool and mirror..

There is extensive storage volumes through out the boat.

2 burner propane Stove

Accommodation

Stove
Broiler
Oven
Sink
Refrigerator
Freezer
Drapes
Air conditioning
Cabin heating
Manual water system
Pressurised water system
Hot water system
Raw water wash
Microwave

The entrance to the interior is through the mid cockpit. The cockpit has a hard dodger with a waterproof cover with2 side windows.

Moving into the interior you find the galley to port and nav station to starboard. The galley has an Isotherm front-loading fridge and a top loading freezer. The freezer has a new compressor and evaporator in 2021. The fridge was converted from water cooled to air cooled because the air cooling uses less power. It can be reversed for tropical cruising. The stove is a Force 10 propane two burner with oven.
Forward of the galley is a large convertible dinette with a centerline mahogany table with fold up leaf.

Forward of the nav station is a bench seat. The entrance to the forward head and guest stateroom is just off center to starboard.
A propane catalytic cabin heater is located on the starboard forward saloon bulkhead. Cabin heat and cooling is also supplied by a single 16,000 BTU Air Marine A/C unit.
The boat is wired and ducted for diesel heat but there is no heat unit.
There is a water tight bulkhead at the entrance to the guest stateroom if there is damage to the forward section of the vessel and it is flooded this will keep the vessel afloat.

Back in the saloon, aft of the nav station is the companionway to the master stateroom and head. The stateroom has an off-center double berth with a vanity table with stool and mirror..

There is extensive storage volumes through out the boat.

2 burner propane Stove

Deck Gear

Spray dodgers
Rode
Fenders
Boathook
Davits
Swim Ladder
Instrument Covers
Passerelle
Cockpit Enclosure
Bow Thruster

5 halyard winches
2 sheet winches
Electric Lofrans Tigres windlass (with remote control)
2 anchors
(Rocna #73 and Fortress Alum. )
190'0" of chain
80'0" of rode
Highfield 10' dinghy (2015)
(RIB)
Deck gear also includes Saitlik 6 man Valise life raft - Repacked in 2013

Nav Equipment

Compass
Speed
Log
Radar
VHF
GPS
Chart plotter
Autopilot
Clock
Navigation lights

Electronics include:
Raymarine Axiom primary MFD monitor/GPS (2020)
Northstar 6000i secondary GPS/plotter w/11" screen
B&G Hercules depth sounder
Raymarine S3G autopilot-computer system replaced 2008
ICOM M502 DSC and distress primary VHF w/ remote mike
B&G Hornet speed and distance logs
ICOM M7000 Pro SSB radio
Raymarine rudder angle indicator
B&G wind direction and speed ( needs new masthead sending unit)
Antennas, cables, mast wiring replaced 2011

Safety Equipment

Life jackets
Life buoys
Horn
Swim ladder
Emergency steering

2 bilge pumps (1 manual / 1 electric)

Broker's Comments

5 VIRTUAL TOURS - 1 VIDEO - 134 PHOTOS - FULL SPECS & BROKER'S COMMENTS CAN BE VIEWED OF THIS AMEL MARAMU!

If you want to sail the world, this may be the vessel for you. The 46' Amel Maramu Ketch was designed and built to do exactly that. When you look for similar models they are located all over the world. This French-built boat has crossed the Atlantic twice and cruised the islands of the Caribbean for several years. The present owner purchased this boat in the British Virgin Islands and after a lot of sailing shipped it to Washington.

As well as being rated as one of the top 12 boats for world cruising it has all the liveaboard comforts needed for all climates. Starting with a new Cummins engine installed in 2009... a Northern Lights generator rebuilt in 2015... in-mast furling for both the main and mizzen... diesel forced air heat and reverse cycle heat/ air.

One final special piece of equipment -- a retractable bow thruster!

Several pages of maintenance records are available.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

Where the particulars herein give details of a boat, whether new or used, they are intended to give a fair description of the vessel but are not guaranteed as accurate or complete. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars and the vessel. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specification above or in a purchase contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless such items are specifically listed herein. At all times, where the particulars herein give details of a new boat and/or a new boat to be supplied/built by a builder/manufacturer, or a boat to be chartered, via our introduction, we do not guarantee or assume responsibility for the accuracy or reliability of any information offered by third-party companies in respect thereof including without limitation new boat builders/manufacturers, charter companies and/or companies/businesses which are ‘Friends of Boatshed’. We shall not be responsible for, or party to, any transactions, contracts or agreements between you and such third-party providers of products or services and it is incumbent upon you to verify such details direct with such entities and contract with them at your sole discretion and on terms that you agree.