Narrowboat 60ft Trad Stern
2019 Bespoke XR&D Traditional
- Boat REF# · 330150
- Length · 60'0"
- Year · 2019
- Construction · Steel
- Underwater profile · Full-Displacement
- Sleeping berths · 2
- Engine · 1 x diesel 50hp, Beta 50 (2020)
- Lying · Lancashire
Extra Details
Builder | X R&D Fabrication |
---|---|
Lying | Lancashire |
Fuel capacity | 40.0 USG Total - 1 Tanks |
Water capacity | 100.0 USG Total - 1 Tanks |
Mechanical
Engine | 1 x diesel 50hp |
---|---|
Engine make and model | Beta 50 (2020) |
Engine Hours |
engine1= 83 |
Steering | tiller |
Drive | shaft |
Prop(s) | 3 Blade |
Fuel consumption (approx) | Not Recorded |
Galvanic Isolator fitted
Victron 3000 Inverter Charger
Dimensions
Length | 60'0" |
---|---|
Beam | 6'10" |
Draft Min | 2'0" |
Draft Max | 2'7" |
Displacement | 35,280.0lbs |
Headroom | 6'6" |
Storage | In water |
Electrical Systems
12 volt battery, 240 shore power voltage, 5 batteries charged by: engine, shore power
Construction
Construction | Steel |
---|---|
Underwater profile | Full-Displacement |
Finish | Bitumen finish |
There is no holding tank. The boat presently has a Porta Potti but that could easily be replaced with a cassette or composting toilet!
The boat has 4 duck hatches 2 forward and 2 in the engine/workshop room
There are plenty of electrical sockets throughout the boat and there are 3 radiators that run off the engine as well as the heating stove.
Accommodation
Total # of berths | 2 |
---|---|
No. of double berths | 1 |
Cabin(s) | 1 |
Shower | 1 |
Heads | 1 heads (Porta Potti) |
Full size bath
5 burner propane Stove
Accommodation
Stove | |
---|---|
Broiler | |
Oven | |
Sink | |
Refrigerator | |
Freezer | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Non-Smokers | |
Washing Machine |
Full size bath
5 burner propane Stove
Deck Gear
Rode | |
---|---|
Fenders |
Nav Equipment
Navigation lights |
---|
Safety Equipment
Carbon Monoxide detector |
---|
1 bilge pumps (0 manual / 1 electric)
Broker's Comments
This is a May 2019 bespoke build from XR&D Boat Builders. Built to a more traditional design with the sloping sides in the front section.
The boat is part completed and requires some internal finishing which is obvious from the pictures. The topsides will require stripping back and a new paint job. The hull was 2 Pac blacked from XR&D.
The boat has a new BSC
This boat will require a Post Construction Survey as she was bought as a sail away and has sailaway RCD.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
5 years
Why are you selling her?
Bereavement
Where have you sailed her?
Scarisbrick