Cape George 36 Cutter
Cape George 36 Cutter Details
| Ref | 63434 |
|---|---|
| Price | US$155,000.00 Reduced |
| LOA | 36'0" |
| Year | 1975 |
| Construction | GRP |
| Underwater profile | Long Keel |
| Berths | 5 |
| Engine | 1 x diesel 55hp, Westerbeke (2005) |
| Lying | San Juan Island - Shown by Appointment |
Contact the Broker
| Boatshed Broker | Paul Crouch |
|---|---|
| Telephone | +1 360 632 4054 |
| paul@boatshedseattle.com |
Extra Details
| Designer | Cecil M. Lange |
|---|---|
| Builder | Cape George Marine Works |
| Lying | San Juan Island - Shown by Appointment |
| Fuel capacity | 1 x 30.0 USG |
| Water capacity | 3 x 80.0 USG |
| Holding tank capacity | 1 x 12.0 USG |
| Last survey | Not Recorded |
Mechanical
| Engine | 1 x diesel 55hp |
|---|---|
| Westerbeke (2005) | |
| Engine Hours | Not Recorded |
| Water cooled | fresh |
| Steering | tiller steering |
| Drive | shaft drive, Fixed 2-blade prop(s) |
| Fuel consumption (approx) | 0.7 USG/hour |
| Cruising speed (approx) | 6 knots |
| Max speed (approx) | 7 knots |
| Engine spares |  |
Water-maker | |
|---|
New Westerbeke 55C four-cylinder diesel installed in 2005 (approximately 400 hours currently); new shaft, cutlass bearings, and a new prop installed. The boat was completely re-wired in 2005, with new batteries, a 150 amp Balmar alternator, and a dodger-mounted solar panel installed.
Dimensions
| LOA | 36'0" |
|---|---|
| LWL | 32'0" |
| Beam | 10'6" |
| Draft Min | 0'0" |
| Draft Max | 5'6" |
| Clearance | 55'0" |
| Displacement | 22,000.0lbs |
| Headroom | 6'1" |
| Storage | On marina |
Rig
Cutter rigged Cape George Marine Works Wood spars (1975), with Stainless Steel standing rigging (2005)
Sails
| Reefing mainsail | Slab |
|---|---|
| Quantum (2005) | |
| Headsail | Furling (2005) |
| Halyard winches | 2 |
| Sheet winches | 4 |
| Spinnaker gear | |
|---|
2005 refit included replacement of all standing and running rigging, and purchase of a new suit of Quantum sails, including a stormsail and a trysail.
Electrical Systems
12 volt, 3 batteries charged by: engine, solar panels
Construction
GRP Construction with Long Keel underwater profile, paint finish
LOA 41'
Cape George Cutters feature heavy, hand-laid low-maintenance fiberglass hulls, and a modern wooden deck structure with a traditional appearance. This 36' cutter has teak decking and gleaming exterior brightwork.
Refitting completed in 2005 included refastening, replugging and caulking the teak decking, barrier coating below the waterline, Awlgrip above the waterline, Awlgrip on the house, and complete refinishing of the caprails, rub rails, etc.
Cape George Cutters feature heavy, hand-laid low-maintenance fiberglass hulls, and a modern wooden deck structure with a traditional appearance. This 36' cutter has teak decking and gleaming exterior brightwork.
Refitting completed in 2005 included refastening, replugging and caulking the teak decking, barrier coating below the waterline, Awlgrip above the waterline, Awlgrip on the house, and complete refinishing of the caprails, rub rails, etc.
Accommodation
| Cooker | |
Oven | |
|---|---|---|---|
| Sink | |
Fridge | |
| Freezer | |
Cabin heating | |
| Pressurised water system | |
Hot water system | |
| Non-Smokers | |
| Sink | 1 |
|---|---|
| Shower | 1 |
| Heads | 1 heads (Manual) |
2005 refit included installation of Force 10 propane stove / oven, Glacier Bay refrigeration, Hurricane hydronic cabin heating system, new custom Corian countertops in galley and head, Raritan hot water, Village Marine watermaker, and complete refinishing of the interior joinery and painted surfaces.
5 berths with 2 doubles and 3 singles in 2 cabin(s) 3 burner propane cooker
Nav Equipment
| Compass | |
Speed | |
|---|---|---|---|
| Wind | |
Depth sounder | |
| Radar | |
VHF DSC radio | |
| SSB | |
GPS | |
| Chart plotter | |
Autopilot | |
| Weather fax | |
Stereo | |
| Clock | |
Barometer | |
| Navigation lights | |
TV | |
| DVD | |
Simrad mast-mounted radar; Simrad chart plotter with cabin and cockpit displays; ICOM DSC VHF and SSB; Bose stereo/video.
Deck Gear
| Sprayhood | |
Bimini | |
|---|---|---|---|
| Tonneau cover | |
Rode | |
| Fenders | |
Instrument Covers | |
electric Maxwell windlass
2 anchors
(1 - CQR 1 - Bruce)
300'0" of chain
250'0" feet of rode
windvane self-steering system
2 anchors
(1 - CQR 1 - Bruce)
300'0" of chain
250'0" feet of rode
windvane self-steering system
Safety Equipment
| Fume detector | |
Searchlight | |
|---|---|---|---|
| Horn | |
3 bilge pumps (1 manual / 2 electric)
Broker's Comments
Disclaimer
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
The particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not a part of any contract or offer and are supplied on the understanding that all negotiations shall be through Boatshed Brokerages, who are acting as brokers for the vendor. The vendor is not selling in the course of a business unless otherwise stated. The prospective purchaser is strongly recommended to check the particulars and where appropriate, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical & electrical.
- For further details on this boat contact Boatshed™ on
- ©2010 Boatshed™
Cape George Cutters have sailed the world from their yard here in the Puget Sound region, and this boat is ready for many thousands of sea miles.
These boat details are subject to contract.
Note: Offers may be considered.